Quick Reference

Tuesday, December 18, 2007

Hotspot 2: Topology Question

640-802 CCNA Hotspot Topology Exhibit





Question 1:
Note: host 172.30.4.4 is wrongly given in Question the correct host must be 172.30.0.4



Answers: 702

Explanation:
The destination layer 2 address is a DLCI for frame-relay network. The destination host packet address is 172.30.0.4 corresponding DLCI is 702.
This can be confirmed by looking at the show frame-relay map output which shows the frame-relay map statements for layer 3 address to its corresponding layer 2 address IP 172.30.0.4 is mapped to DLCI 702 .

Question 2:


Answers: frame-relay map ip 172.30.0.3 196 broadcast

Explanation:

The show frame-relay map command above output provides the dynamic mapping for S-AMER (.3 as per topology the complete address is 172.30.0.3) to DLCI 196.

To create a static frame-relay map on dubai router to S-AMER we use the following command

Syntax: frame-relay map protocol protocol-address dlci [broadcast]

frame-relay map ip 172.30.0.3 196 broadcast

Question 3:

Answers: The serial connection to the MidEast branch office

Explanation:

By seeing the partial running config provided for Dubai router ... We can identify what encapuslation type is configured on each interface

Interface serial 1/0 : encapsulation frame-relay

Interface serial 1/2 and serial 1/3 : Both have encapsulation ppp

Interaface serial 1/1: Has no config info on encapsulation type this determines the default encapsulation (HDLC) is not changed on this interface.

Serial 1/1 is connection to MidEast branch office from Dubai router which has the default encapsulation.

Question 4:

Answers: No password is required.

Explanation: The serial connection between the mideast and Dubai router is having the default WAN encapsulation of HDLC. Since, HDLC requires no password to be set for connection establishment, "no password is required" is the correct answer.

29 comments:

test said...

Great blog help me a lot with my certification... i take the cert today and i get 931 :D cheers

Anonymous said...

helping others the way u do is unique i'm preparing for my exam soon
i think ur blog saved hours of digging
sir there is no words to fullfil ur effort
please think of starting one for ccnp:)

Anonymous said...

Dear All
Can anyone explain Question 4 why T1net is answer no "No password required.

in Latest pass4sure answer is No password required. please help i am appearing for my exam tomorrow

a3tips said...

Hi,
if u read the question carefully
Q4 asks if required what password is configured....

so no password required will be a wrong option...

T1net is correct answer if password needs to be configure because it matches with the vty lines password of dubai router.

Anonymous said...

Hi a2tips,
Thanks for your great site. As i am a Cisco Academy Student so i am going to take CCNA exam 640-801 V3.1 on 2nd January, 2008. I need your suggestion about the questions and the SIM's. Is there any changes of the previous types of Q's like TI V11.0 or P4S V2.83? I will be waiting for kind help. Thank you.

Chondan

a3tips said...

Hi Chondan,

There is no change for 640-801 exam...

Best of luck to your CCNA Exam

Cheers!!

Jammy said...

Hi all,
Today I wrote CCNA 640-802 exam & passed with 1000 marks. Thanks for this Great Blog which guided me properly in getting sucess in my exams.
Guys help me for choosing which CCNP paper to appear first...
thnx again for all the help.
regards,
Jamal

Anonymous said...

Hi, great blog!!!

Just wondering for the last question... It specifies a telnet/vty line password but aren't they talking about something like a
PPP PAP or CHAP password that might be required to connect the routers?

That's why I think the answer would be no password required. there is no pap or chap authentication on this line

Anonymous said...

So what's the final answer? Is it t1net or no password. I am taking the test tomorrow

a3tips said...

Hi,

Go for the T1net option simply beacuse the questions asks if password required what will you configure,

Cheers!!

shadmani said...

hies...could anyone plz help me out...i want the answers for the pass4sure dumps...with the question no. 4,26,27,33 (what what if ips would be change there?), 43,51,62,71,90,106,186,200,209,251...help me plzzzzzz...!

Anonymous said...

I just want to give a hats off to a3tips!! Absolutely awesome job here! I am sitting for the 640-802 tomorrow! This website in addition to to P4S_2.98, CBT Nuggets,TK and PacketTracer has made me very confident for my exam tomorrow.. I will be sure to post my exam experience tomorrow afternoon. Wish me Luck!! Thanks Again!!

lirana said...

There is a P4S 2.98???
I only know about version 2.93...

Anonymous said...

hey..plz reply if there is a P4S 2.98...ia'm having my test 2 days later....plzzzz...

Anonymous said...

I want to express my great THANK YOU to author od this blog. The usefull materials published here, helped passed the cert exam today with score 949/1000...
Robert (Slovakia)

(It was my pleasure to buy you a beer :D

Anonymous said...

THANK YOU!! To the author of this blog. The usefull materials published here, helped passed the cert exam today with score 960/1000...
I had the Hotspot, Drag and Drop, ACL (NAT SIMS) most the Topology Based Labs. All question matched the P4S v2.85

A pitcher is on its way :)

Anonymous said...

P4S_2.98

are you sure, dude, and i thought the lates pass4sure was 2.95

Anonymous said...

This site is awesome! I just passed my 640-802 exam!

Thanks!!!

Anonymous said...

Great blog! Helped me with my certification a great deal! I took the exam today and got a 894, could of done better but had some issues with the exam not working properly.

I'm definitely buying a3tips a pitcher!!!! Thanks!!!

Anonymous said...

Does anybody know if the help in CLI and the autocomplete work in the two sim labs? Thanks

Stephanie said...

hi lethalpennywise, what's the issues with the exam? what do you mean on not working properly? i'll be taking my exam this month and i need to clear that out. please respond. thanks in advance.

D.A.R.Y.L said...

passed 640-802. Great blog, THANKS to its creator!!

Anonymous said...

I take My test tomorrow. Thanks to this greAT SITE AND PASS4SURE

Anonymous said...

Hi all,
Thanks to the author & Contibutors to this blop. Its very helpful and with lots of preciuous Infor far all guys who want to be CCNA certified. Did my CCNA exam on 10th may, 2008 and passed . Had Hotspot, Drag and Drop, ACL (NAT SIMS) most the Topology Based Labs. The blog is super.

Anonymous said...

Took the 640-802 exam this morning and passed. Did not do that well but I think it went awry on some wireless questions.

If not for your explanation of configuring NAT, I would not have passed--a NAT question is what I missed to fail the test two years ago on the -801 exam.

Cheers.

Anonymous said...

Did my CCNA June 02 and passed, thanks to this site and the explanations. The administrator is absolutely awesome. Keep it up.

Anonymous said...

Hi a3tips, keep up the good work. Did my exam and passed. All the questions on this site are correct. I will definately buy you a pitcher. You deserve it. Will there be any blogg for the CCNP? Please start one. Thanks

Anonymous said...

hi guys, i got pass with full score. This web site is very helpful and good explanation. All the topics discuss here are very good. P4S some answers are not correct, and they are corrected in this site. i got simulations for 3 routers and 1 switch,ip adreess placement in the right place and NATing.

Anonymous said...

i got this sim on may 11th. Passed with 916, thanks for all your help. The exam HAS changed, half questions from pass4sure 3.22 and half were new. Same labs, diff ip addresses and diff multiple choice qs. Access list and RIP v2 labs also came up. Good luck!